Cold-Mount 1 Pressure Sensitive Adhesive
CM1 is our low cost ultra aggressive adhesive. It consists of an opaque white center, or carrier, coated on two sides with Coda's CM1 adhesive formulation The adhesive has one heavy paper release liner. The very smooth opaque white adhesive is suitable for most mounting situations The extremely even nature of this adhesive makes it especially appropriate for very thin graphic materials and high gloss materials. It will minimize the "orange peel" effect often seen with other adhesives when working with images with a high gloss surface. The white center to this adhesive is somewhat spongy, allowing it to bridge over the high and low spots in substrates. This yields a smoother finish than can be achieved with other adhesives. The adhesive is very aggressive It has been engineered to form an especially tight bond with most standard mounting substrates It is especially compatible with "low energy", difficult to bond to surfaces, such as plastic (Styrene) surfaces expanded PVC (e g. Sintra), and all Gatorfoam surfaces.
In contrast to some "low cost" adhesives with very thin carriers and release liners CM1 has a thick carrier that is resistant to stretching during application. The release liner is a thick poly coated silicone paper This liner resists puckering from high moisture in humid climates. The thick liner makes it difficult to "stretch" the adhesive web with excessive feed tension during application This eliminates the wrinkling and folding that can happen with very thin carrier based adhesives
Note: Custom sizes are available on all of our products. Please call 201-825-7400 for pricing on custom sizes.
Note This adhesive is supplied on 3" cores. The adhesive is wound with the exposed side in.
ALL PRESSES AND LAMINATORS SHIP VIA FREIGHT ONLY, PLEASE CALL US FOR THE BEST RATE TO YOUR LOCATION. NOTE: CUSTOM SIZES ARE AVAILABLE ON ALL OF OUR PRODUCTS, IF YOU NEED A PRODUCT OR SIZE THAT IS NOT LISTED PLEASE CALL US AT 201-825-7400 OR EMAIL SALES@CODAMOUNT.COM.